RM series controlled atmosphere sealed Box Multi-purpose Furnace is a high-end controlled atmosphere sealed box multi-purpose furnace designed and manufactured in full accordance with European standards. All parts are made according to high standards, and all key parts are made of German or other foreign brands.

Controlled Atmosphere Sealed Box Multipurpose Furnace

It is mainly used for heat treatment processes such as carburizing, quenching, normalizing, annealing and tempering of large gears, shafts and bearings for wind power, marine, rubber and plastic, engineering machinery, etc.

Controlled Atmosphere Pit Carburizing Furnace Production Line

Controlled Atmosphere Nitriding Furnaces are divided into: box-type nitriding furnaces, pit-type nitriding furnaces and bell-type nitriding furnaces, which are mainly used for traditional nitriding or nitrocarburizing of workpieces such as gears, shafts, crankshafts, molds, etc., to improve the wear resistance and fatigue resistance of the workpiece surface and extend the service life of the workpiece.

Controlled Atmosphere Nitriding Furnace

The vacuum hydrocarbon solvent cleaning machine is based on the principlethat hydrocarbon solvents have good solubility, and can effectively clean parts with anti-rust oil, quenching oil and other contaminants. The equipment consists of a front chamber cleaning chamber, a solvent box, an evaporation device, a rear chamber distillation device, a vacuum system, a nitrogen system and a control system.

Vacuum Hydrocarbon Solvent Washing Machine

The production line consists of a box-type heating furnace, a quenching tank, a fast cooling table, a three-axis linkage forklift and a fully automatic control system for the production line. The entire production line adopts centralized control, and all large-tonnage workpieces can be quenched without a tray.

Large Tonnage Quenching and Tempering Production Line

The production line of the digital mobile insulation cover controlled atmosphere pit furnace consists of a mobile controlled atmosphere pit furnace, a pit tempering furnace, a loading and unloading transfer well, a cleaning machine, a quenching oil tank, a quenching water tank, a mobile insulation cover material car, etc.

Digital Mobile Insulation Cover Controlled Atmosphere Pit Furnace Production Line

The pretreatment furnace adopts a centrifugal fan and a hot air circulation heating system. The furnace temperature uniformity can reach ±5 degrees. After pretreatment, the parts can improve the carburizing speed and the uniformity of the carburized layer. There is a large-screen operation panel in front of the furnace, which can be manually and automatically operated and monitor the equipment action, and can prompt faults and sound and light alarms.

Continuous Push Rod Production Line

Company News

Pit Type Slow Cooling Furnace

Price：

￥0.00
Category：

Controlled Atmosphere Pit Carburizing Furnace Production Line
Browse number：

106
Release time：

2024-08-26 15:34:27
Quantity： - +
Share：

INQUIRY

Detailed Description

Pit Type Slow Cooling Furnace

Equipment Features:
1. The furnace body adopts a cylindrical water-cooled sandwich steel structure to achieve the purpose of cooling the workpiece.
2. The complete heat-resistant steel air guide system in the furnace ensures the orderly flow of air in the furnace.
3. The nitrogen protection device can effectively reduce the oxidation and decarburization of the workpiece.
4. The high-pressure and high-flow frequency conversion circulation fan on the furnace cover effectively ensures the circulation of airflow and makes the cooling speed uniform.

FAQ

How to maintain Industrial Washing Machine？
Electrical maintenance: Keep the electrical control box and equipment vents away from water vapor, corrosive gases, and dust, and clean the dust regularly. Check the grounding wire to ensure that the equipment is well grounded.
Inspection and replacement: Check the nozzle, filter, pump body, motor and other parts regularly to ensure that they are not blocked, damaged, and operate normally. If necessary, clean or replace them in time.

What industries are Pit Furnaces used in?

Pit Furnace is widely used in many industries. In the machinery manufacturing, automobile manufacturing, aerospace and other industries, pit furnaces are widely used in heat treatment processes such as annealing, normalizing, quenching, and tempering of materials. It can effectively improve the mechanical properties of the workpiece, such as toughness, rigidity and hardness, while ensuring the surface quality of the workpiece.

What are the requirements for the operation of Multipurpose Furnace?
Before operation, ensure that the operator is familiar with the safe operating procedures of the equipment and wears protective equipment. Preheat the furnace according to the process requirements. For furnace types that require atmosphere control, the atmosphere in the furnace must be adjusted according to the process requirements to ensure the heat treatment quality of the workpiece.

Industry Applications

Company Profile

Jiangsu kingkind Industrial Furnace Co., Ltd. is a national high-tech enterprise integrating R&D, manufacturing, sales and service of heat treatment industrial furnaces.The company is located at No. 9, Yongchuang Road, Dafeng District, Yancheng City, Jiangsu Province. The company has a registered capital of 25.5 million yuan, covers an area of 60 acres, has a current plant building area of 21,000 square meters, and has more than 160 employees. The company's products cover a variety of high-end precision-controlled heat treatment equipment: controlled atmosphere sealed box-type multi-purpose furnace (oil quenching/water quenching/salt quenching), Controlled Atmosphere Nitriding Furnace (box type/well type/hood type), controlled atmosphere well type Carburizing Furnace, quenching and Tempering Production Line and cleaning equipment supporting the production line such as water-based cleaning machine, vacuum ultrasonic cleaning machine, vacuum hydrocarbon solvent cleaning machine, etc. Its main technical personnel have many years of experience in the design, manufacture and use of industrial furnaces. They can design, develop and manufacture various standard and non-standard industrial furnaces according to the different needs of customers to meet the needs of different users.